Handling of packages
- Minirail
- Standard
- Conductive Ring
- Cold Ring (-30 ºC)
- Special
- Reinforced (Hi-Load)
- Guide Profiles (position on rails)
- Accessories and Components
Handling of packages / Light loads
- Made of a 0.8 mm thick galvanised, perforated metal sheet, with injected polypropylene wheels (polyethylene in the case of -30 ºC) and mounted on a zinc plated steel axle 3 mm in diameter. Precisely cut to ± 1 mm, the material is always cut, mounted and delivered to the length specified by the client.
- The holes are 16.5 mm apart, so the minimum distance between standard wheels is 33 mm. In the case of flange wheels, the minimum distance is 49.5 mm. Thanks to a 4 mm diameter hole in the base, the subsequent fitting of rivets and screws is made easier.
